Aluminium Conveyor - FH Series - 105mm Wide
The FH aluminium conveyor is based on an anodized aluminium beam fitted with low friction slide rail which guides the flexible plastic chain. Tight radius wheel bends and larger radius plain bends mean products, large and small can be carried around both horizontal and vertical bends. Bends start at 160mm radius with bend angles of 30°, 45°, 90° and 180°. Guide rails on the sides of the conveyor make sure that the products stay on track.
Technical Details
Type / Model |
FH |
Chain width |
103mm |
Beam width |
105mm |
Drive |
Front, Suspended, Catenary, Horizontal Wheel Bend |
Idler |
End |
Chain |
Plain, Friction, Cleated, Steel top, Roller |
Horizontal Wheel Bend |
|
Radius 150mm |
- |
Radius 160mm |
30°, 45°, 90°, 180° |
Radius 200mm |
- |
Horizontal Plain Bend |
|
Radius 500mm |
30°, 45°, 60°, 90° |
Radius 700mm |
- |
Radius 1000mm |
30°, 45°, 60°, 90° |
Vertical Bend |
|
Radius 300mm |
- |
Radius 400mm |
5°, 7°, 15°, 30°, 45°, 60°, 90° |
Radius 1000mm |
- |
Tensile strength at 20°C |
5500N |
Maximum working tension |
1500N |
Working temperature |
-20°C to 60°C |
Recommended running speed |
3-50 m/min |
Max.conveyor length (depend on layout) |
30m |
Minimum turning radius |
170mm |
Link spacing (Pitch) |
35.4mm |
Chain weight (plain chain) |
1.7kg/m |
Chain weight (friction chain) |
1.7kg/m |
Chain weight (gripper chain) |
- |
|